K-10 & Evening Star Road Eudora, KS 66025

(816) 896-5170

 

Tom The Sawyer

Portable Sawmill Service

Furniture or firewood?        Lumber or landfill?

The responsible choice is yours....


Urban lumber; tree-cycling, woody waste reclamation; they're all 'green' or ecological terms for a process that some of us have been practicing for years.  Usually those terms refer to logs that come from locations within city limits or subdivisions... even those growing near rural homes.  Most urban trees are destined for the landfill once their useful life is completed and a huge volume of potential lumber is wasted.  Those trees, planted as a decorative or landscaping alternative, may provide "exotic" lumber - not native to the surrounding area.  It is so disappointing to see potential saw logs chopped up into firewood and mulch or, worse yet, hauled off to decay in a landfill.

 

In the next few years we are likely to have an overabundance of urban trees to salvage.  Kansas is on the western edge of an invasive insect's range, the Emerald Ash Borer.  This pest is expected to kill off 90% of our ash trees in the next decade.  Johnson, Wyandotte, and Leavenworth counties in Kansas, and all of Missouri, are currently under Federal EAB quarantine.   There are other potential problems; Asian Longhorn Beetle, Thousand Cankers Disease of Walnut, Gypsy Moth, and many others, but EAB is the most serious threat in the near future.

 

Whenever a tree comes down there will be parts of that tree for which the best use may very well be as firewood or mulch.  There may also be portions of that tree that would be suitable for furniture or other woodworking projects.  Personally, I don't cut trees down for logs, I try to salvage what is already down. 


Our local landfill charges $53 per ton with a 3 ton minimum for trees and brush.  A 24" diameter, 12' long oak log would weigh about 2400 pounds.  The landfill fee would be $159 plus the cost of cutting it into pieces, loading it and hauling it to the dump.  You might find someone who would take it for the firewood, maybe 1/3 of a cord.  Either way you end up with nothing.


That log should yield at least 300 board feet of lumber and the cost to have it milled would be about $150.  Once air dried, you may have almost $1000 worth of lumber for your projects.  That's a pretty good return on your investment.  There is a great deal of satisfaction in a project that you took from a standing tree to a family heirloom.


There are definite ecological benefits to turning your logs into lumber.  Trees process carbon dioxide from the atmosphere and, through photosynthesis, return oxygen to the air and store the carbon in the biomass of the tree, a process known as carbon sequestration.  After that tree comes down, carbon dioxide is returned to the atmosphere as the tree decays or is burned.  The portion of the tree that is preserved, milled into lumber and dried, retains that carbon within the lumber indefinitely.


Urban trees are not without their challenges.  Large mills won't normally handle them due to the likelihood of metal or other debris in the logs.  Although you don't remember building a tree house, nailing up a sign, or attaching a fence or clothesline to that tree; who knows what has happened while humans have been around that tree for the last 50-150 years.  A conventional mill with a large circular blade that hits debris may destroy a very expensive blade, hurl shrapnel throughout the work area and suffer quite a bit of downtime.  I try to avoid metal while sawing but if I hit an object and destroy a blade, the cost is about $25, and if it only dulls the blade, it would be even less.  Plus, no shrapnel flying around is a definite safety advantage.

 

If you have a tree down and don't have a use for the lumber, consider the benefits to the environment and donate the log.  If I can convert into usable lumber I may even haul it away for free.  Ask your tree service if they would charge you less if they don't have to dispose of the logs..